Raspberry Pi and 1-Wire Temperature/Environmental Sensors

I've discussed 1-wire before. In this case, I needed a cheap temperature sensor to alert on environmental conditions in an server room.

I set up a Raspberry Pi with stock Raspian and install digitemp like so:

apt install digitemp

I used an iButtonlink usb master (here: http://www.ibuttonlink.com/products/linkusb and a t-sense sensor here:
http://www.ibuttonlink.com/products/t-sense )

The USB device shows up as /dev/ttyUSB0 as an FTDI serial port.

I can walk the 1-wire tree like so:

sudo digitemp_DS9097U -s /dev/ttyUSB0 -w
DigiTemp v3.6.0 Copyright 1996-2007 by Brian C. Lane
GNU General Public License v2.0 - http://www.digitemp.com
Turning off all DS2409 Couplers
..
Devices on the Main LAN
2149B214090000D1 : DS18B20 Temperature Sensor
01C3235419000000 : DS2401/DS1990A Serial Number iButton

That being said, you'll want to create a dot file to use this like so:

 sudo digitemp_DS9097U -s /dev/ttyUSB0 -i
DigiTemp v3.6.0 Copyright 1996-2007 by Brian C. Lane
GNU General Public License v2.0 - http://www.digitemp.com
Turning off all DS2409 Couplers
..
Searching the 1-Wire LAN
2149B214090000D1 : DS18B20 Temperature Sensor
ROM #0 : 2149B214090000D1
Wrote .digitemprc

I have one temperature sensor at the moment. After creating the .digitemprc, I can query it:

 sudo digitemp_DS9097U -s /dev/ttyUSB0 -t 0
DigiTemp v3.6.0 Copyright 1996-2007 by Brian C. Lane
GNU General Public License v2.0 - http://www.digitemp.com
Oct 30 20:16:45 Sensor 0 C: 21.00 F: 69.80